Description WyreStorm 100m 4K60 AVX Extender with eARC The WyreStorm 100m 4K60 AVX Extender with eARC is full compatible with eARC. So you can transmit audio signals such as Dolby TrueHD/Atmos and DTS-HD MA 7.1 signals from a smart TV back to an eARC enabled AVR or soundbar. Flexible control passthrough options including IR, RS-232 and LAN allow you control a display and get devices connected over long distances. View QuickStart Guide >> View Specifications >> Features Supports the latest UHD resolutions including HDR10, HLG and Dolby Vision formats Extend 18Gbps content up to 100 meters using Cat6a cabling or higher Compatible with eARC displays for transmitting high-bitrate audio formats including Dolby Atmos and DTS:X Backwards compatible with standard ARC Uses powerful AVX transmission technology Supports full CEC passthrough via TV remote to control connected AV equipment such as AVR volume or menu navigation PoE allows the transmitter to power the receiver over category cable 3 audio modes configured by dipswitches: eARC, S/PDIF passthrough, HDMI input de-embed Control signal passthrough via bidirectional IR, 2-way RS-232 and Gigabit LAN 4K HDR & DOLBY VISION Sporting an 18Gbps HDMI input, the EX-100-H2-EARC can support all UHD video signals up to and including 2160p 4:4:4/60, and high framerate HDR 12bit 4:2:2 up to 60Hz. EARC Equipped with eARC capability, send high-bitrate audio formats such as Dolby Atmos or DTS:X from an eARC display back to an AVR or soundbar through native HDMI. Let’s not forget backwards compatibility with standard ARC as well. FLEXIBLE CONTROL Passthrough signals such as IR and RS-232 from a control system to control your display or other AV equipment. The ethernet passthrough supports full 1Gbps speeds for extending internet or LAN connections. POWER OVER ETHERNET Simply power the transmitter side of the extender and the receiver will power over the category cable. Reducing points of failure and making installation easier. In the Box 1x EX-100-H2-EARC Transmitter 1x EX-100-H2-EARC Receiver 1x 12V DC 3A Power Supply (US/UK/EU/AU) 1x IR Receiver 1x IR Emitter 4x Mounting Brackets with screws 2x 3-pin Terminal Blocks 1x QuickStart Guide Specifications AUDIO & VIDEO Inputs TRANSMITTER: 1x HDMI: 19-pin type A RECEIVER: 1x AVX: 8-pin RJ-45 Female // 1x S/PDIF: Toslink Audio Outputs 1x AVX: 8-pin RJ-45 Female 1x S/PDIF: Toslink Audio 1x HDMI: 19-pin type A Output Video Encoding: AVX Encoding Data Rate: 10.2Gbps End to End Latency: 10μs (microseconds) Audio Formats: HDMI Passthrough: 2ch Analog/PCM | Multichannel: LPCM up to DTS-X and Dolby Atmos eARC: 2ch Analog/PCM | Multichannel: LPCM up to DTS-X and Dolby Atmos S/PDIF: 2ch Analog/PCM | Multichannel: LPCM up to Dolby Digital 5.1 Video Resolutions (max) 1920x1080p @120Hz 12bit 3840x2160p @60H 8bit 4:4:4 3840x2160p @60Hz 12bit 4:2:2 HDR Supported Standards: DCI | RGB | HDR | HDR10 | Low Latency Dolby Vision up to 60Hz | HLG | BT.2020 | BT.2100 Maximum Pixel Clock: 600MHz COMMUNICATION & CONTROL HDMI: HDMI | HDCP 2.2 | EDID | CEC Pass-through | DVI/D supported with adapter (not included) AVX: HDMI | HDCP 2.2 | EDID | Audio | 1-way PoC (TX powers RX) | Bidirectional IR/RS-232/Ethernet | CEC Ethernet: 1x Ethernet: 8-pin RJ-45 Female | Bidirectional over AVX (Transmitter and Receiver) IR: 1x IR RX: 3.5mm (1/8in) TRS Stereo | 1x IR TX: 3.5mm (1/8in) TS Mono (Transmitter and Receiver) RS-232: 1x RS-232: 3-pin Phoenix (Transmitter and Receiver) POWER Power Supply: 12V DC 3A Max Power Consumption: 24W
